X. Degree Programs

Bachelor of Engineering [B.Eng.]

Environmental Engineering Program Regular and Co-op (ENVE/ENVE:C)

School of Engineering, College of Physical and Engineering Science

The degradation of the environment is a concern shared by citizens, government agencies, non governmental agencies and businesses. The Environmental Engineering program offered by the School of Engineering provides graduates with design and engineering skills to minimize and prevent the impact of human activities on water, soil and air systems. Both simple and innovative solutions are part of the tool box. Graduates will also creatively integrate humanistic and social perspectives in their solutions.

Major (Honours Program)

Semester 1 - Regular or Co-op
CHEM*1040 [0.50] General Chemistry I
CIS*1500 [0.50] Introduction to Programming
ENGG*1100 [0.75] Engineering and Design I
MATH*1200 [0.50] Calculus I
One of:
ENGG*1210 [0.50] Engineering Mechanics I
HIST*1250 [0.50] Science and Technology in a Global Context
Note: ENGG*1210 or HIST*1250 must be taken in semester 1; the remaining course must be taken in semester 2.
Semester 2 - Regular or Co-op
CHEM*1050 [0.50] General Chemistry II
ENGG*1500 [0.50] Engineering Analysis
MATH*1210 [0.50] Calculus II
PHYS*1130 [0.50] Physics with Applications
One of:
ENGG*1210 [0.50] Engineering Mechanics I
HIST*1250 [0.50] Science and Technology in a Global Context
Semester 3 - Regular or Co-op
COOP*1100 [0.00] Introduction to Co-operative Education
ENGG*2400 [0.50] Engineering Systems Analysis
MATH*2270 [0.50] Applied Differential Equations
0.50 restricted electives
One of:
BIOL*1090 [0.50] Introduction to Molecular and Cellular Biology
MICR*2420 [0.50] Introduction to Microbiology
One of:
ENGG*2100 [0.75] Engineering and Design II
STAT*2120 [0.50] Probability and Statistics for Engineers
One of:
ENGG*2120 [0.50] Material Science
ENGG*2230 [0.50] Fluid Mechanics
Note: ENGG*2100 or STAT*2120 must be taken in semester 3; the remaining course must be taken in semester 4.
Note:ENGG*2120 or ENGG*2230 must be taken in semester 3; the remaining course must be taken in semester 4.
Semester 4 - Regular or Co-op
ENGG*2450 [0.50] Electric Circuits
ENGG*2560 [0.50] Environmental Engineering Systems
MATH*2130 [0.50] Numerical Methods
One of:
ENGG*2100 [0.75] Engineering and Design II
STAT*2120 [0.50] Probability and Statistics for Engineers
One of:
ENGG*2120 [0.50] Material Science
ENGG*2230 [0.50] Fluid Mechanics
0.50 restricted electives
Semester 5 - Regular or Co-op
ENGG*3180 [0.50] Air Quality
ENGG*3240 [0.50] Engineering Economics
ENGG*3260 [0.50] Thermodynamics
ENGG*3590 [0.50] Water Quality
ENGG*3650 [0.50] Hydrology
0.50 restricted electives
Semester 6 Regular / Semester 7 Co-op
ENGG*3100 [0.75] Engineering and Design III
ENGG*3220 [0.50] Groundwater Engineering
ENGG*3410 [0.50] Systems and Control Theory
ENGG*3430 [0.50] Heat and Mass Transfer
ENGG*3470 [0.50] Mass Transfer Operations
0.50 restricted electives
Semester 7 Regular / Semester 6 Co-op
ENGG*3670 [0.50] Soil Mechanics
ENGG*4330 [0.75] Air Pollution Control
ENGG*4340 [0.50] Solid and Hazardous Waste Management
ENGG*4370 [0.75] Urban Water Systems Design
0.50 restricted electives
Semester 8 - Regular or Co-op
ENGG*4130 [1.00] Environmental Engineering Design IV
ENGG*4260 [0.75] Water and Wastewater Treatment Design
1.00 restricted electives
Restricted Electives (see Program Guide for more information)

A maximum of 1.50 credits at the 1000 level is allowed for elective requirements.

  • 2.00 credits in Complementary Studies (Students need to take 0.50 credits from each of the three sub-lists noted in the Program Guide. The remaining 0.50 credits can be taken from any Complementary Studies sub-list.)

  • 1.50 credits in Environmental Engineering electives

Minor (Honours Program)

Students must be registered in the B.Eng degree program to apply for a minor in Environmental Engineering.

The minor can be satisfied by taking the following additional courses:

BIOC*2580 [0.50] Introduction to Biochemistry
CHEM*3360 [0.50] Environmental Chemistry and Toxicology
ENGG*3180 [0.50] Air Quality
ENGG*3590 [0.50] Water Quality
ENGG*4260 [0.75] Water and Wastewater Treatment Design
GEOG*1300 [0.50] Introduction to the Biophysical Environment
MICR*1020 [0.50] Fundamentals of Applied Microbiology
MICR*4180 [0.50] Microbial Processes in Environmental Management
One of:
ENGG*2560 [0.50] Environmental Engineering Systems
ENGG*2660 [0.50] Biological Engineering Systems I
One of:
ENGG*3470 [0.50] Mass Transfer Operations
ENGG*4330 [0.75] Air Pollution Control
ENGG*4340 [0.50] Solid and Hazardous Waste Management
Students must incorporate an environmental application as part of their capstone design course worth 1.00 credits in the final semester of their B.Eng major program.
University of Guelph
50 Stone Road East
Guelph, Ontario, N1G 2W1
Canada
519-824-4120