Cadence software is being used primarily in the following courses:
ENGG*4550 : VLSI Digital Design
ENGG*6520 : Advanced VLSI Digital Design
ENGG*4080: Analog Integrated Circuits
ENGG*6510: Advanced Analog Integrated Circuit Design
ENGG*6600*01: Semiconductor Memories
ENGG*6600*02 : Embedded Cryptosystem
Cadence Tools in Our Research
Cadence software is being used in many research projects including:
Power-Smart Systems-On-Chips. Project coordinator: Dr. Radu Muresan.
Self-Powered Wireless Integrated Sensors. Project coordinator: Dr. Stefano Gregori.
High-speed Low-power AES Encryption ASIC. Project coordinator: Dr. Radu Muresan
Resource Sharing in Hardware-accelerated Real-time Systems. Project coordinator: Dr. Radu Muresan
A prototype chip is shown that integrates an analog technique for secure cryptographic applications. The chip was designed with Cadence tools and manufactured using 0.18μ technology.
From left: Dr. Stefano Gregori, Dr. Radu Muresan, Dr. Haleh Vahedi
Cadence is a registered trademark of Cadence Design Systems, Inc., 2655 Seely Avenue, San Jose, CA 95134.
Information is provided 'as is' without warranty of any kind. No statement is made
and no attempt has been made to examine the information, either with respect to
operability, origin, authorship, or otherwise. Please use this information at your own
risk. We recommend using it on a copy of your data to be sure you understand what it
does under your conditions. Keep your master intact until you are satisfied with the use
of this information within your environment.
This page is maintained by:
School of Engineering
University of Guelph
50 Stone Road West
Guelph, ON N1G 2W1
E-mail: islab at uoguelph dot ca