Connecting to uog-wifi-secure with a Blackberry

Below are instructions for connecting Blackberry Torch and Curve models.  Other models should have a similar connection process.

Instructions for Blackberry Curve can be found below.

 Instructions for connecting Blackberry Torch

  1.  Click on Trackpad and choose Manage Connections.

     

  2. Choose Set Up Wifi Network from Manage Connections. 

     

  3. Choose uog-wifi-secure

     

  4. Configure the following settings:

    • Enterprise sub-type: PEAP
    • Username: your UoG Central Login Account ID.
    • Password: your UoG Central Login Password.
    • CA certificate: Thawte Premium Server CA.
    • Inner link security: EAP-MS-CHAP v2.
    • Token: <none selected>
    • Server Subject: Blank
    • Server SAN: Blank
  • If after trying to connect you receive a Failed to associate with Network message, try again to connect by choosing uog-wifi-secure and clicking on the trackpad.
  • If you are using a Blackberry Torch you may need to edit the saved uog-wifi-secure profile and choose the option:  Allow inter-access point handover

Instructions for Blackberry Curve

  1. Click on the Blackberry button on the phone.
  2. Choose Manage Connections and make sure the wi-fi is turned ON.
  3. Click on Setup wi-fi.
  4. Choose Next.
  5. Choose Scan for networks.
    • This will search for all available networks.
    • Choose uog-wifi-secure.
  6. Configure the following settings:
    • Enterprise sub-type: PEAP
    • Username: your UoG Central Login Account ID.
    • Password: your UoG Central Login Password.
    • CA certificate: Thawte Premium Server CA.
    • Inner link security: EAP-MS-CHAP v2.
    • Token: <none selected>
    • Server Subject:Blank
    • Server SAN:Blank