Biomedical Engineering - Restricted Electives - 2015/2016
1. Engineering Electives
The combination of elective credits required to graduate are noted in the Course Calendar for your specific Cohort. All elective course offerings are subject to a minimum enrollment of 10 students. Courses may be cancelled by the university at any time if enrollment is less than 10. Semester offerings for courses may change without notice. Students should refer to the current Undergraduate Calendar to confirm that the course will be offered in the semester indicated in this program guide. Concerned that the elective prerequisites have changed mid-program? See the Engineering Elective Prerequisite - History of Changes table.
BME-1 Elective List : Biomedical Engineering Electives (2.0 Credit Required; NOTE: Maximum 1.0 Credits from PART B)
Fall Offerings (semester offering subject to change; confirm in current Calendar)
ENGG*3150 [0.50] Engineering Biomechanics, F
ENGG*3160 [0.50] Biological Engineering Systems II, F
ENGG*3270 [0.50] Electromagnetics in Biomedical Engineering, F [NEW COURSE AS OF F19]
ENGG*3700 [0.50] Optimization for Engineers, F
ENGG*4040 [0.50] Medical Imaging Modalities, F
ENGG*4460 [0.50] Robotic Systems, F
ENGG*4470 [0.50] Finite Element Analysis, F
Winter Offerings (semester offering subject to change; confirm in current Calendar)
ENGG*2340 [0.50] Kinematics and Dynamics, W (Semester 4 recommended)
ENGG*2660 [0.50] Biological Engineering Systems I, W (Semester 4 recommended)
ENGG*4050 [0.50] Quality Control, W
ENGG*4060 [0.50] Biomedical Signals Processing, W
ENGG*4510 [0.50] Assessment and Management of Risk, W
ENGG*4660 [0.50] Medical Imaging Processing, W
(Maximum 1.0 Credits from Part B)
BIOC*2580 [0.50] Introductory Biochemistry, S/F/W
BIOM*3090 [0.50] Principles of Pharmacology, S/F/W
CHEM*2700 [0.50] Organic Chemistry I, S/W (see Program Counsellor for prerequsite information)
HK*4070 [0.50] Clinical Biomechanics, W (see Program Counsellor for prerequsite information)
HK*4240 [0.75] Occupational Biomechanics and Ergonomics, W
HK*4610 [0.50] Health and Injury Biomechanics, F
TOX*2000 [0.50] Principles of Toxicology, F
BME-2 Elective List: Biomedical Engineering Design Electives (0.75 Credits Required)
ENGG*4280 [0.75] Digital Process Control Design, W - Note as of W21, ENGG*4280 is no longer offered. This course has been replaced with ENGG*4490.
ENGG*4380 [0.75] Bioreactor Design, F
ENGG*4400 [0.75] Biomechanical Engineering Design, W
2. Complementary Studies Electives
B.Eng. students must select [2.00] credits (four courses) from the Complementary Studies electives. You must select one course from each of the three sub-lists (CS-1, CS-2 and CS-3). The remaining 0.5 credit can be chosen from any of the three sub-lists. These electives are meant to broaden your knowledge of society, culture, government and the economy so that you may better understand the impact of engineering on society as large.
3. Biomedical Engineering Areas of Interest
Areas of Interest are optional. Selection of the restricted elective courses available in the BME-1 and BME-2 lists should be based on each student's personal and professional interests. Students who wish to strengthen their knowledge in a particular area of interest can use the chart below for reference.
Note: Not an inclusive list of all options. See BME-1 List for all electives.
Area Of Interest
ENGG*2340 Kinematics and Dynamics, W
ENGG*2660 Biological Engineering Systems I, W
ENGG*4040 Medical Imaging Modalities, F
4. Conditions for Graduation
To qualify for the degree, the student must complete the courses required for the Bachelor of Engineering Program in Biomedical Engineering, obtaining a minimum of 23.25 credits, and must achieve an overall minimum cumulative average of at least 60% and a minimum cumulative average of at least 60% in all ENGG courses.