Publications

In Preparation/Under Review (for Refereed Journals)

(** Supervised Student)

  1. A.S. Sardar**, E. Espinosa, C.H.M. Simha, A. Bardelcik, Realistic Morphology-Based Representative Volume Elements for Dual-Phase Steels, Mechanics of Materials, (Under Review), 2020.
  2. A. Bardelcik, A.S. Sardar**, C.J. Vowles**. A Numerical Investigation into the Effect of 3D Representative Volume Element (RVE) Grain Morphology Resolution on the Prediction of Damage Accumulation and Strain Partitioning within Multi-Phase Steels, Steel Research International, (Submitted), 2020.
  3. P. Bhagtani**, M. Sharma, L. Bichler, A. Bardelcik, A. Elsayed. "Thermal Conductivity Modelling and Measurement of Al-Fe, Al-Ni, and Al-Co Spark Plasma Sintered Alloys, targeted for Microscopy and Microanalysis, (In Preparation), 2020.
  4. A. Bardelcik, Q. Butler. Meso-Scale Strain Measurements of Multi-Phase Steels using In-Situ SEM Tensile Tests and Digital Image Correlation, targeted for Strain, (In Preparation), 2020.
  5. C. Bourque**, A. Bardelcik, M. Wells, Short-Cycle Tempering of 1.8 GPa Press Hardening Steel, targeted for Metallurgical and Materials Transactions A, (In Preparation), 2020.

 

Refereed Journal Papers

(** Supervised Student)

  1. A. Bardelcik, S. Yang, F. Alderson, A. Gadsden. The Effect of Wash Treatment on the Mechanical Properties and Energy Absorption Potential of a 3D Printed Polymethyl Methacrylate (PMMA), Materials Today Communications, (In-Press), 2020.
  2. A.S. Sardar**, C.H.M. Simha, A. Bardelcik, Phenomenological Model for Yield Flow and Failure Behavior of Dual-Phase Steels,  Material Science & Engineering A, vol. 789 (Article 140136), 2020.
  3. S. Wu**, A. Bardelcik, T. Zhou, P. Badgley, C. Cathcart. A Microstructural and Damage Investigation into the Effect of Coiling Temperature on the Low Temperature Impact Behavior of an HSLA Structural Steel, Canadian Metallurgical Quarterly, (Minor Revision Resubmit), 2020.
  4. A. Bardelcik, B.T. Ananthapillai**. Induction Weld Seam Characterization of Continuously Roll Formed TRIP690 Tubes, Metals, vol. 10 (4), 425-441, 2020.
  5. J.G. Quitzan, A. Singh, H. Beaufrere, A. Valverde, B. Lillie, M. Salahshoor**, A. Bardelcik, T.M. Saleh. Evaluation of the performance of an endoscopic 3‐mm electrothermal bipolar vessel sealing device intended for single use after multiple use‐and‐resterilization cycles, Veterinary Surgery, vol. 49, 120-130, 2020.
  6. A. Bardelcik, C. Vowles**, M. J. Worswick. A Mechanical, Microstructural and Damage Study of Various Tailor Hot Stamped Material Conditions Consisting of Martensite, Bainite, Ferrite and Pearlite, Metallurgical and Materials Transactions A, vol. 49 (4), 1102-1120, 2018.
  7. K. Omer, R. George, A. Bardelcik, M.J. Worswick, S. Malcolm, D. Detwiler. Development of a hot stamped channel section with axially tailored properties – experiments and models, International Journal of Material Forming, vol. 11 (1), 149-164, 2018.
  8. T. Rahmaan, A. Bardelcik, J. Imbert, C. Butcher, M.J. Worswick, Effect of Strain Rate on Flow Stress and Anisotropy of DP600, TRIP780 and AA5182-O Sheet Metal Alloys, International Journal of Impact Engineering, vol. 88, 72-90, 2016.
  9. D. Anderson, S. Winkler, A. Bardelcik, M.J. Worswick,  Influence of Stress Triaxiality and Strain Rate on the Failure Behaviour of a Dual-Phase DP780 Steel, Materials and Design, vol. 60, 198-207, 2014.
  10. S. Kurukuri, M.J. Worswick, A. Bardelcik, R.K. Mishra, J.T. Carter, Constitutive behavior of commercial grade ZEK100 magnesium alloy sheet over wide range of strain rates, Metallurgical and Materials Transactions A, vol. 45A, 3321-3337, 2014.
  11. A. Bardelcik, M.J. Worswick, M. Wells, The Influence of Martensite, Bainite and Ferrite on the As-Quenched Constitutive Response of Simultaneously Quenched and Deformed Boron Steel – Experiments and Model, Materials and Design, vol. 55, 509-525, 2014.
  12. M.J. Worswick, R. George, A. Bardelcik, L. ten Kortenaar, D. Detwiler. Thermal Processing History and Resulting Impact Response of a Hot-Formed Component with Tailored Properties – Numerical Study, Applied Mechanics and Materials, vol. 566, 34-40, 2014.
  13. A. Bardelcik, M.J. Worswick, The Effect of Pressure Die Boost during Pre-Bending on the Subsequent Formability of HSLA350 Tubes in Hydroforming – Experiments and Models, Slteel Research International (Special Edition), 627-630, 2012.
  14. A. Bardelcik, M.J. Worswick, S. Winkler, M. Wells, A Strain Rate Sensitive Constitutive Model for Quenched Boron Steel with Tailored Properties,  International Journal of Impact Engineering, vol. 50, 49-62, 2012.
  15. R. George, A. Bardelcik, M.J. Worswick, Hot Forming of Boron Steels using Heated and Cooled Tooling for Tailored Properties, Journal of Materials Processing Technology, vol. 212, 2386-2399, 2012.
  16. A. Bardelcik, C. Salisbury, S. Winkler, M.J. Worswick, M. Wells, Effect of Cooling Rate on the High Strain Rate Properties of Boron Steel, International Journal of Impact Engineering, vol. 37, 694-702, 2010. *Most Cited Paper for this Journal (as of December, 2015)
  17. A. Bardelcik, M.J. Worswick, Estimating the Strain-Based FLC of a Tube from Straight Tube Hydroforming Experiments and Numerical Models, SAE International Journal of Materials and Manufacturing, vol. 1, 794-799, 2009.
  18. Butcher, Z. Chen, A. Bardelcik, M. J. Worswick, A Combined Upper and Lower Bound Approach to Damage-Based Finite Element Modeling of Straight Tube Hydroforming, International Journal of Fracture, vol. 155 (1), 55-65, 2009.
  19. C.H.M. Simha, J. Gholipour, A. Bardelcik, M. J. Worswick, Prediction of Necking in Tubular Hydroforming Using an Extended Stress-Based Forming Limit Curve, ASME Transactions: Journal of Engineering Materials and Technology, vol. 129 (1), 36-47, 2007.
  20. A. Bardelcik, M. J. Worswick, Evaluation of Load Control End-Feed in Hydroforming of Pre-Bent DP600 Steel Tube using the Extended Stress-Based Forming Limit Curve (XSFLC) Failure Criterion, Journal of Computational and Applied Mechanics, vol. 7 (2), 133-154, 2006.
  21. A. Bardelcik, M.J. Worswick, Numerical Investigation into the Effect of Bending Boost and Hydroforming End-Feed on the Hydroformability of DP600 Steel Tube, SAE Transactions: Journal of Materials and Manufacturing, vol. 114, 41-51, 2006.

 

Refereed Papers in Conference Proceedings

 

  1. A. Bardelcik, C. Vowles, Damage Characterization of Tailored Hot Stampings, 6th International Conference on Hot Sheet Forming of High-Performance Steel, Atlanta, USA, 759-766, 2017.
  2. A. Bardelcik, Y. Prajogo, M.J. Worswick, D. Detwiler, S. Malcolm. Mechanical and Microstructural Properties of a Tailored Hot Stamping with In-Die Heating, 5th International Conference on Hot Sheet Forming of High-Performance Steel, Toronto, Canada, 775-782, 2015.
  3. K. Omer, A. Bardelcik, R. George, M.J. Worswick, D. Detwiler, S. Malcolm, N. Adam. Development and Testing of a Hot Stamped Axial Crush Member with Tailored Properties, 5th International Conference on Hot Sheet Forming of High-Performance Steel, Toronto, Canada, 583-590, 2015.
  4. L. ten Kortenaar, K. Omer, C. Butcher, A. Bardelcik, M.J. Worswick, D. Detwiler, S. Malcolm. Implementation of a Failure Criterion for Axial Crush of Fully Hardened Boron Steel, 5th International Conference on Hot Sheet Forming of High-Performance Steel, Toronto, Canada, 157-166, 2015.
  5. A. Bardelcik, A. Bouhier, M.J. Worswick, Three Point Bend Performance of Solutionized, Die Quenched and Heat Treated AA7075 Beam Members, International Conference on Aluminum Alloys 2014, Published in Materials Science Forum, vol. 794-796, 431-436, 2014.
  6. Y. Prajogo, K. Omer, A. Bardelcik, M.J. Worswick, N. Adam, D. Detwiler, Development of a Hot Stamped Side Impact Beam and Axial Crush Member with Tailored Properties, 4th International Conference on Hot Sheet Forming of High-Performance Steel, Lulea, Sweden, 15-22, 2013.
  7. L. ten Kortenaar, A. Bardelcik, M.J. Worswick, D. Detwiler, R. Soldaat, Effect of Stress Triaxiality and Strain Rate on the Fracture Response of a Fully Hardened and Tailored Boron Steel, 4th International Conference on Hot Sheet Forming of High-Performance Steel, Lulea, Sweden, 565-572, 2013.
  8. R. George, A. Bardelcik, M.J. Worswick, Improving the Prediction of the Bainite and Ferrite Phase Transformation during Hot Stamping Simulations using LS-Dyna, 4th International Conference on Hot Sheet Forming of High-Performance Steel, Lulea, Sweden, 67-74, 2013.
  9. S. Kurukuri, A. Bardelcik, M.J. Worswick, High Strain Rate Characterization of ZEK100 Magnesium Alloy Sheet, DYMAT 2012, Freiburg, Germany, paper 01042, 2012.
  10. A. Bardelcik, R. George, M.J. Worswick, Transition Zone Tensile Properties within a Tailored Hot Stamping, SAE World Congress 2012, Detroit, Michigan, USA, paper 2012-01-0531, 2012.
  11. A. Bardelcik, K. Ghavam, R. George, M.J. Worswick, An Impact Model of a Hot Stamped Lab-Scale B-Pillar with Tailored Properties, 3rd International Conference on Hot Sheet Metal Forming of High-Performance Steel, Kassel, Germany, 221-228, 2011.
  12. R. George, A. Bardelcik, M.J. Worswick, Hot Forming of a Lab-Scale B-Pillar with Tailored Properties – Experiment and Modeling, 3rd International Conference on Hot Sheet Metal Forming of High-Performance Steel, Kassel, Germany, 31-37, 2011.
  13. Z. Chen, C. Butcher, A. Bardelcik, M. J. Worswick, A Dual Bound Approach to Damage-Based Finite-Element Modeling of Tube Hydroforming, COM2010: Proceedings of the 49th Annual Conference of Metallurgists, Vancouver, British Columbia, Canada, 2009.
  14. A. Bardelcik, M.J. Worswick, Straight Tube Hydroforming of Dual Phase (DP780) Steel Tubes with End-Feed, NUMIFORM 2010: Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes, Pohang, South Korea, 2010.
  15. D. Hasenpouth, C. Salisbury, A. Bardelcik, M.J. Worswick, Constitutive Behavior of Magnesium Alloy Sheet at High Strain Rates, DYMAT 2009, Brussels, Belgium, 1431-1435, 2009.
  16. R. George, A. Bardelcik, M.J. Worswick, Development of a Hot Forming Die to Produce Parts with Tailored Mechanical Properties – Numerical Study, 2nd International Conference on Hot Sheet Metal Forming of High-Performance Steel, Lulea, Sweden, 189-198, 2009.
  17. A. Bardelcik, M. Wells M.J. Worswick, The Effect of Cooling Rate on the Mechanical Properties and Energy Absorption Potential of Hardened Boron Steel, 2nd International Conference on Hot Sheet Metal Forming of High-Performance Steel, Lulea, Sweden, 105-114, 2009.
  18. R. George, A. Bardelcik, M.J. Worswick, Localized Die Temperature Control for Tailored Properties in Hot Forming of Boron Steels, IDDRG 2009: Material Property Data for more Effective Numerical Analysis, Golden, Colorado, USA, 131-139, 2009.
  19. A. Bardelcik, C. Salisbury, M.J. Worswick, M. Wells, High Strain Rate Properties of Hot Formed Die Quenched Boron Steel, 1st International Conference on Hot Sheet Metal Forming of High-Performance Steel, Kassel, Germany, 45-54, 2008.
  20. A. Bardelcik, M.J. Worswick, The Effect of End-Feed on Straight and Pre-Bent Tubular Hydroforming of DP600 Tubes, NUMISHEET 2008: Proceedings of the 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Part A, Interlaken, Switzerland, 651-656, 2008.
  21. A. Bardelcik, F. Nassiri, M.J. Worswick, Numerical Modeling of DP780 Tubular Hydroforming, 11th ESAFORM 2008 Conference on Material Forming, Lyon, France, 2008.
  22. A. Bardelcik, M.J. Worswick, Hydroforming of DP600 Straight Tube with Load Control End-Feed – Experiment and Modelling, IDDRG 2006: Drawing The Things To Come, Porto, Portugal, 27-34, 2006.
  23. C.H.M. Simha, J. Gholipour, A. Bardelcik, M. J. Worswick, Application of an Extended Stress-Based Failure Criteria in Tubular Hydroforming, NUMISHEET 2005: Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Part A, Detroit, Michigan, USA, 511-516, 2005.
  24. A. Bardelcik, M.J. Worswick, The Effect of Element Formulation on the Prediction of Boost Effects in Numerical Tube Bending, NUMISHEET 2005: Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Part A, Detroit, Michigan, USA, 774-780, 2005.
  25. S.L. Winkler, A. Bardelcik, M.J. Worswick, Y. Ososkov, D.S. Wilkinson, M. K. Jain, Damage and Formability of High Strength DP600 and AKDQ Steel Tubes, SAE World Congress 2005, Detroit, Michigan, USA, paper 2005-01-0092, 2005.

 

Conference Presentation with Refereed Published Abstracts

 

  1. S. DiCecco, C. Butcher, A. Bardelcik, M.J. Worswick, E. Chu, E. Boettcher, X. Niu, Elevated Temperature Formability of Aluminum Alloy AA7075-T6, SAE World Congress 2015, Detroit, Michigan, USA, 2015.
  2. S. DiCecco, C. Butcher, A. Bardelcik, M.J. Worswick, E. Boettcher, X. Niu, E. Chu, Warm forming limits of aluminum alloy AA7075-T6, America’s Conference on Aluminum Alloys, Toronto, Canada 2015.
  3. T. Rahmaan, A. Bardelcik, J. Imbert, M.J. Worswick, Strain rate sensitivity and anisotropy of TRIP780, DP600, and AA5182-O sheet metal alloy, International Conference on Impact Loading of Lightweight Structures, Cape Town, South Africa, 2014.
  4. A. Bardelcik, R. George, M.J. Worswick, M. Wells, As-Formed Properties of Tailored Hot Stamped Components, International Symposium on Plasticity 2012, San Juan, Puerto Rico, 2012
  5. A. Bardelcik, C. Salisbury, S. Winkler, M.J. Worswick, M. Wells, High Strain Rate Properties of Boron Steel – Effect of Cooling Rate, International Conference on Impact Loading of Lightweight Structures, Trondheim, Norway, 2008
  6. A. Bardelcik, M.J. Worswick, Experimental and Numerical Analysis of Straight Tube Hydroforming with End-Feed, 5th Annual North American Hydroforming Conference and Exhibition, Nashville, Tennessee, USA, 2007.
  7. A. Bardelcik, M.J. Worswick, I. van Riemsdijk, Hydroforming of Advanced High Strength Steel, 19th Canadian Material Science Conference, Hamilton, Ontario, Canada, 2007.
  8. A. Bardelcik, M.J. Worswick, Bending and Hydroforming of Advanced High Strength Steel, 4th Annual North American Hydroforming Conference and Exhibition, London, Ontario, Canada, 2006.
  9. A. Bardelcik, M.J. Worswick, Improving the Formability of Steel Tubes during Hydroforming through the use of Bending Boost and Hydroforming End-Feed, NADDRG 2005 Annual Meeting, Midland, Ontario, Canada, 2005.
  10. A. Bardelcik, D. Oliveria, J. Dyment, M.J. Worswick, Instrumented Bending and Hydroforming of DP600 Tube, Conference of Metallurgists 2004, Canadian Institute of Mining, Metallurgy and Petroleum, Hamilton, Ontario, Canada, 2004.

 

Research Reports

 

  1. A. Bardelcik, Plane Strain Damage Modes in Advanced High Strength Steels [Confidential], 2018.
  2. A. Bardelcik, Investigation of Hot Stamped Tab Failures due to Delayed Fracture [Confidential], 2016.
  3. A. Bardelcik, M.J.  Worswick, Material Testing and Spot Weld Characterization of SPC1180DUB and SCGA1180DUB Sheet Metal Steels [Confidential], 2016.
  4. C. Butcher, A. Bardelcik, T. Rahmaan, M.J.  Worswick, 1180 Material & Fracture Characterization [Confidential], 2016.
  5. A. Bardelcik, T. Rahmaan, M.J.  Worswick, Low to High Strain Rate Characterization of a 1,000 MPa Automotive Sheet Metal [Confidential], 2016.
  6. A. Bardelcik, T. Rahmaan, M.J.  Worswick, Fracture, Formability and the Low to High Strain Rate Constitutive Characterization of a 980 MPa Sheet Metal Steel, Part B: Low to High Strain Rate Constitutive Characterization [Confidential], 2016.
  7. A. Bardelcik, T. Rahmaan, M.J.  Worswick, Low to High Strain Rate Characterization of a 980 MPa Sheet Metal Steel [Confidential], 2015.
  8. A. Bardelcik, M.J.  Worswick, Material Testing and Spot Weld Characterization of Hot Stamped Structural Components [Confidential], 2015.
  9. A. Bardelcik, M.J.  Worswick, Low and Intermediate Strain Rate Characterization of Extruded Aluminum Bumper [Confidential], 2014.
  10. A. Bardelcik, M.J. Worswick, Low to High Strain Rate Characterization of a 980 MPa Automotive Sheet Metal [Confidential], 2013.
  11. A. Bardelcik, M.J. Worswick, Quasi-Static and High Strain Rate Characterization of an Ultra High Strength Metal [Confidential], 2013.
  12. A. Bardelcik, M.J. Worswick, Low to High Strain Rate Characterization of SCGA270C and SPH440 Steel Metal [Confidential], 2013.
  13. A. Bardelcik, M.J. Worswick, Quasi-Static and High Strain Rate Characterization of 17-4 PH and AISI 410 Forgings [Confidential], 2012.
  14. A. Bardelcik, S. Kurukuri, M.J. Worswick, Low to High Strain Rate Characterization of SCGA590DU AND SCGA440 Steel Metal [Confidential], 2012.
  15. A. Bardelcik, M.J. Worswick, High Strain Rate Characterization of CSA G40.21 Grade 44W and SSAB Armox 440T Steel Plate [Confidential], 2012.
  16. A. Bardelcik, M.J. Worswick, Mandrel Rotary-Draw Tube Bending of SS321 Tubes [Confidential], 2011.
  17. A. Bardelcik, M.J. Worswick, Lateral Testing of Steel Brackets [Confidential], 2011.
  18. A. Bardelcik, M.J. Worswick, Low to High Strain Rate Characterization of SCGA980DU Steel Sheet [Confidential], 2011.
  19. A. Bardelcik, M.J. Worswick, Twist Compression Testing of Coated Aluminum Sheet Alloys (WQ and CHRQ) – Short Gage R&R Study [Confidential], 2010.
  20. A. Bardelcik, M.J. Worswick, M.A. Wells, High Strain Rate Behaviour of Hot Formed Boron Steel with Tailored Properties: Effect of Cooling Rate, 2010.
  21. A. Bardelcik, D. Hasenpouth, M.J. Worswick, Low to High Strain Rate Characterization of SPC980DU Steel Sheet [Confidential], 2010.
  22. C. Salisbury, A. Bardelcik, M.J. Worswick, High Strain Rate Properties of DP780 [Confidential],2008.
  23. A. Bardelcik, M.J. Worswick, I. Van Riemsdijk, C. Kim, General Motors Collaborative Report (CL-08-301MPL) Hydro-forming of Tubes made of DP600 and Interstitiabl-Free Steels: Trials and Numerical Simulations [Confidential], 2008.
  24. A. Bardelcik, M.J. Worswick, Limiting Dome Height Testing of a Stainless Steel Laminate Sheet Metal [Confidential], 2008.
  25. C. Salisbury, A. Bardelcik, S. Winkler, M.J. Worswick, High Strain Rate Properties of USIBOR 1500P [Confidential], 2008.
  26. A. Bardelcik, M.J. Worswick, Twist-Compression Friction Testing of Hydroforming Alloys and Lubricants [Confidential], 2007.