Young, C., Oliver, M.L., Gordon, K.D. Design and validation of a novel 3D-printed wearable knee device for monitoring knee joint kinematics. Accepted for publication in Medical Engineering and Physics, May 2021.
Nolan, A., Govers, M., Oliver, M. Effect of fatigue on muscle latency, muscle activation and perceived discomfort when exposed to whole-body vibration. Accepted for publication to Ergonomics, March 2021.
Ziraldo, E., Attalla, S., Kodsi, S., and Oliver, M., “Driver Response to Left Incurring Path Intrusions at Sign-Controlled Intersections,” SAE Int. J. Adv. & Curr. Prac. in Mobility 2(3):1633-1642, 2020, doi:10.4271/2020-01-0886.
Ziraldo, E., Attalla, S., Kodsi, S., and Oliver, M., “Driver Response to Right Turning Path Intrusions at Signalized Intersections,” SAE Int. J. Adv. & Curr. Prac. in Mobility 2(3):1633-1642, 2020, doi:10.4271/2020-01-0884.
Vale, J., Clemmer, R., Couler, C. and Oliver, M. Impact of remote versus in-person lecture attendance on student performance. Accepted February 2020 for publication in The Canadian Journal for the Scholarship of Teaching and Learning.
Toxopeus, R., Attalla, S., Kodsi, S., Oliver, M., Driver Response Time to Midblock Crossing Pedestrians,” SAE Technical Paper 2018-01-0514, 2018, doi:10.4271/2018-01-0514.
Attalla, S., Toxopeus, R., Kodsi, S., and Oliver, M., Driver Response Time to Left-Turning Vehicles at Traffic Signal Controlled Intersections, SAE Technical Paper 2018-01-0521, 2018, doi:10.4271/2018-01-0521.
Toxopeus, R., Attalla, S., Kodsi, S., and Oliver, M., Driver Response Time to Cyclist Path Intrusions, SAE Technical Paper 2018-01-0531, 2018, doi:10.4271/2018-01-0531.
Boucher, D. and Oliver, M. Design of a horizontally dynamic armrest for joystick controlled mobile heavy equipment. Occupational Ergonomics, 13:S105-S113, 2017 (doi: 10.3233/OER-170258).
Mathers, B., Agur, A., Oliver, M. and Gordon, K. Biaxial quantification of deep layer transverse carpal ligament elastic properties by sex and region. Clinical Biomechanics. 40:58-62, 2016. (doi: 10.1016/j.clinbiomech.2016.10.011. Epub 2016 Oct 27)
Oliver, M., Hope, P., Conrad, L., Jack, R.J., Dickey, J.P. and Eger, T. Reducing whole-body vibration through field vibration tested heavy equipment seat retrofitting. Occupational Ergonomics, 13(2): 15-22, 2016.
Oliver, M. and Eger, T. Guest Editorial for Special Issue on Human Vibration. Occupational Ergonomics, 13(2): 1-2, 2016.
Weber, J.F., Agur, A.M.R., Fattah, A.Y., Gordon, K.D., Oliver, M.L. Mechanical properties of human forearm tissues. Journal of Hand Surgery (European Volume), 40E(7):711-719, 2015.
Brett, A., Gordon, K, Oliver, M, Agur, A. and Edwards, M. Biomechanical Properties of the Transverse Carpal Ligament. Clinical Biomechanics, 29(6):601–606, 2014.
Conrad, L., Oliver, M., Jack, J., Eger, T. and Dickey, J. Selecting seats for steel industry mobile machines based on Seat Effective Amplitude Transmissibility and comfort. Work, 47: 123–136, 2014.
Jack, R.J., Oliver, M. and Hayward G. Using a high resolution motion capture system to determine 6-DOF whole-body vibration accelerations. Journal of Low Frequency Noise, Vibration and Active Control, 32(4):273-284, 2013. (Online Version in Noise Notes 03/2014; 13(1):13-24. DOI:10.1260/1475-4722.214.171.124).
Oliver, M., Murphy, T., Northey, G., MacLean, A., and Sexsmith, J. Joystick stiffness, movement speed and direction effects on upper limb muscular loading. Occupational Ergonomics. 10(4)175-187, 2012.
Conrad, L., Oliver, M., Jack, J., Eger, T. and Dickey, J. Quantification of 6-degree-of-Freedom Chassis Whole-Body vibration in mobile heavy vehicles used in the steel making industry. Journal of Low Frequency Noise, Vibration and Active Control. 31(2):85-104, 2012.
Harnish, C., Eger, T., Oliver, M., and Dickey, J. Predicting health risks associated with whole-body vibration and repeated shock exposure in steel manufacturing vehicle operators. Occupational Ergonomics 10(3):125-137, 2012.
Plewa, K.M., Eger, T.R., Oliver, M.L. and Dickey, J.P. Comparison between ISO 2631-1 comfort prediction equations and self-reported comfort values during occupational exposure to whole-body vehicular vibration. Journal of Low Frequency Noise, Vibration and Active Control. 31(1): 43-53, 2012.
Ravichandiran, M., Ravichandiran, N., Ravichandiran, K., McKee, N.H., Richardson, D., Oliver, M., Agur, A. Neuromuscular partitioning in the extensor carpi radialis longus and brevis based on intramuscular nerve distribution patterns: a three-dimensional modeling study. Clinical Anatomy 25:366–372, 2012.
Murphy, T. and Oliver, M. A comparison of task and muscle specific isometric submaximal EMG data normalization techniques for the analysis of muscle loads during hydraulic-actuation joystick controller use. Occupational Ergonomics 10(1-2):39-52, 2011.
Cation, S., Oliver, M. Jack, R.J., Dickey, J., Lee Shee, N. Calibration of a six degree of freedom device for whole body vibration determination. Advances in Acoustics and Vibration. vol. 2011, Article ID 276898, 7 pages, 2011. doi:10.1155/2011/276898.
Murphy, T. and Oliver, M. Evaluation of a dynamic armrest for hydraulic-actuation controller use. Applied Ergonomics. (42)5:692 - 698, 2011.
Jack, R.J., Oliver, M., Dickey, J.P., Cation, S., Hayward, G. and Lee-Shee, N. 6-Degree-of-Freedom Whole-body vibration exposure levels during routine skidder operations. Ergonomics. (53)5:696-715, 2010.
Ravichandiran, K., Ravichandiran, M., Oliver, M.L., Singh, K., McKee, N.H., and Agur, A. Fiber bundle element method of determining physiological cross sectional area from 3D computer muscle models created from digitized fiber bundle data. Computer Methods in Biomechanics and Biomedical Engineering 13(6):741-748, 2010.
Dickey J.P., Eger T., Oliver M. A systematic approach to simulating field-based occupational whole-body vibration exposure in the lab using a 6df robot. Work 35(1):15-26, 2010.
Pokhai, G.G., Gordon, K.D. and Oliver, M.L. A new laser reflectance system capable of measuring changing cross-sectional area of soft tissues during tensile testing. Journal of Biomechanical Engineering. September, 131(9) 095404, 2009.
Ravichandiran, K., Ravichandiran, M., Oliver, M.L., Singh, K., McKee, N.H., and Agur, A. Determining physiological cross-sectional area of extensor carpi radialus and brevis as a whole and by regions using 3D computer muscle models created from digitized fibre bundle data. Computer Methods and Programs in Biomedicine. 95(3): 203-212, 2009.
Cation, S., Jack, R., Oliver, M., Dickey, J., and Lee-Shee, N.K. Six degree of freedom whole-body vibration during forestry skidder operations. International Journal of Industrial Ergonomics. 38:739–757, 2008.
Murphy, T. and Oliver, M. Development and design of a dynamic armrest for hydraulic-actuation joystick controlled mobile machines. Applied Ergonomics. 39(3):316-324, 2008.
Jack, R., Oliver, M. and Dony, R. The use of multiple resolution cross-correlations to align simultaneously collected whole-body vibration data. Journal of Low Frequency Noise, Vibration and Active Control. 27(2):1-20, 2008.
Jack, R. and Oliver, M. A review of factors influencing whole-body vibration injuries in forestry mobile machine operators. International Journal of Forest Engineering. 19(1):1-15, 2008.
Jack, R., Oliver, M., Cation, S. and Dony, B. Tri-planar trunk motion in Northern Ontario skidder operators. International Journal on Industrial Risk Engineering. 1(1):1-20, 2008.
Murphy, T. and Oliver, M. Hydraulic-actuation joystick use: a torque, range of motion and electromyographic description. Occupational Ergonomics. 7(3):201-213, 2007.
Dickey, J.P., Eger, T.R., Oliver M.L., Boileau, P.-E., Trick, L.M. and Edwards, M. Multi-axis sinusoidal whole-body vibrations: Part II - Relationship between Vibration Total Value and discomfort varies between vibration axes. Journal of Low Frequency Noise, Vibration and Active Control. 26(3):195-204, 2007.
Oliver, M., Tingley, M., Rogers, R., Rickards, J., and Biden, E. Effect of joystick stiffness, movement speed and movement direction on joystick and upper limb kinematics when using hydraulic-actuation joystick controls in heavy vehicles. Ergonomics. 50(6):837-58, 2007.
Dickey, J.P., Oliver, M.L., Boileau, P.E., Eger, T. and Trick, L.M. Multi-axis sinusoidal whole-body vibrations: Part I - How long should the vibration and rest exposures be for reliable discomfort measures? Journal of Low Frequency Noise, Vibration and Active Control, 25(3), 175-184, 2006.
Oliver, M., Rogers, R., Rickards, J., and Biden, E. Effect of stiffness and movement speed on selected dynamic torque characteristics of hydraulic-actuation joystick controls for heavy vehicles. Ergonomics, 49(3), 249-268, 2006.
Northey, G., Oliver, M. and Rittenhouse M. Calibration of a Hall Effect joystick position measurement system using a neural network. Journal of Biomechanics, 39:1943-1947, 2006.